Journal

 

2018

  1. Hong Hyun Son, Namgook Kim, Sung Joong Kim, “Novel measurement of receding wicked liquid responsible for critical heat flux enhancement”, International Journal of Heat and Mass Transfer,  Vol. 124, pp. 150-157, 2018
  2. Uiju Jeong, Hong Hyun Son, Sung Joong Kim, “Influence of the aligned flow obstacles on critical heat flux in two-phase boundary layer flow under a low flow condition”, Vol. 121, pp. 1234-1250, 2018
  3. Wonjun Choi, Seon Oh Yu, Sung Joong Kim, “Efficacy analysis of hydrogen mitigation measures of CANDU containment under LOCA scenario”, Annals of Nuclear Energy, Vol. 118, pp. 122-130, 2018
  4. Nam Kyung Kim, Joongoo Jeon, Wonjun Choi, Sung Joong Kim, “Systematic hydrogen risk analysis of OPR 1000 containment before RPV failure under station blackout scenario”, Annals of Nuclear Energy, Vol. 116, pp. 429-438, 2018
  5. Uiju Jeong and Sung Joong Kim, “Subcooling effect on boiling heat transfer of inclined downward-facing surface under low flow and pressure”, International Journal of Heat and Mass Transfer, Vol. 127, pp. 182-195, 2018

2017

  1. Gwanghyeok Seo, Hong Hyun Son, Uiju Jeong, Doyoung Shin, Sung Joong Kim, “Effects of Layer-by-Layer Assembled PEI/MWCNT Surfaces on Enhanced Pool Boiling Critical Heat Flux”, International Journal of Heat and Mass Transfer, Vol. 109, pp. 564-576, 2017
  2. Wonjun Choi, Hwan-Yeol Kim, Rae-Joon Park, Sung Joong Kim, “Effectiveness and adverse effects of in-vessel retention strategies under a postulated SGTR accident of an OPR1000”, Journal of Nuclear Science and Technology, Vol. 54, Issue 3, pp. 337-347, 2017
  3. Yongjae Lee, Wonjun Choi, Sung Joong Kim, “Efficacy assessment of independent severe accident mitigation measures in OPR1000 using MELCOR code”, Journal of Nuclear Science and Technology, Vol. 54, Issue 1, pp. 89-100, 2017
  4. Hong Hyun Son, Kyusang Song, Uiju Jeong, Gyoodong Jeun, Sung Joong Kim, “Effects of flow obstacles on pool boiling critical heat flux of a downward-facing metal heater”, Experimental Thermal and Fluid Science, Vol. 80, pp. 313-326, 2017
  5. Seon Oh Yu, Yong Jin Cho, Sung Joong Kim, “Effect of emergency core cooling system flow reduction on channel temperature during recirculation phase of break loss-of-coolant accident at Wolsong unit 1”, Nuclear Engineering and Technology, Vol. 49, Issue 5, pp. 979-988, 2017
  6. Hong Hyun Son, Gwanghyeok Seo, Uiju Jeong, Doyoung Shin, Sung Joong Kim, “Capillary wicking effect of a Cr-sputtered superhydrophilic surface on enhancement of pool boiling critical heat flux”, International Journal of Heat and Mass Transfer, Vol. 113, pp. 115-128, 2017

2016

  1. Seunghyeon Lee, Gwang Hyeok Seo, Sanghyeok Lee, Uiju Jeong, Sang Jun Lee, Sung Joong Kim, Wonjoon Choi, “Layer-by-Layer carbon nanotube coatings for enhanced pool boiling heat transfer on metal surfaces”, Carbon, Vol.107, pp. 607-618, 2016
  2. Gwang Hyeok Seo, Gyoodong Jeun, Sung Joong Kim, “Enhanced pool boiling critical heat flux with a FeCrAl layer fabricated by DC sputtering”, International Journal of Heat and Mass Transfer, Vol. 102, pp. 1293-1307, 2016
  3. Hong Hyun Son, Uiju Jeong, Gwang Hyeok Seo, Sung Joong Kim. “Oxidation effect on the pool boiling critical heat flux of the carbon steel substrates.” International Journal of Heat and Mass Transfer, 93, pp.1008-1019, 2016

  4. Yongjae Lee, Wonjun Choi, Seungwon Seo, Hwan-Yeol Kim, Sung Joong Kim, “Development of safety injection flow map associated with target depressurization for effective severe accident management of OPR1000”, Journal of Nuclear Science and Technology, Vol. 53, No. 10, pp. 1502-1512, 2016
  5. Uiju Jeong, Tae-Joon Kim, Yun Ho Kim, Hong Hyun Son, Gwang Hyeok Seo, Sung Joong Kim. “Numerical evaluation of SmCo permanent magnet flowmeter measuring sodium flow in a low flow rate regime using FLUENT/MHD module.” Journal of Nuclear Science and Technology, Vol. 53, 2, pp. 173-183, 2016

  6. Doyoung Shin, Uiju Jeong, Gyoodong Jeun, and Sung Joong Kim, “CFD Analysis of Natural Convection Flow Characteristics of Various Gases in the Spent Fuel Dry Storage System,” The KSFM Journal of Fluid Machinery, Vol. 19, No. 4, pp. 19-28, 2016

2015

  1. Gwang Hyeok Seo, Gyoodong Jeun, and Sung Joong Kim. “Pool boiling heat transfer characteristics of zircaloy and SiC claddings in deionized water at low pressure.” Experimental Thermal and Fluid Science, 64, pp.42-53, 2015
  2. Seungwon Seo, Yongjae Lee, Seongnyeon Lee, Hwan-Yeol Kim, Sung Joong Kim “Effectiveness and adverse effects of reactor coolant system depressurization strategy with various severe accident management guidance entry conditions for OPR1000”, Journal of Nuclear Science and Technology, 52, 5, pp.695-708, 2015.

  3. Gwang Hyeok Seo, Hayoung Hwang, Jongwoong Yoon, Taehan Yeo, Hong Hyun Son, Uiju Jeong, Gyoodong Jeun, Wonjoon Choi, Sung Joong Kim “Enhanced critical heat flux with single-walled carbon nanotubes bonded on metal surfaces”, Experimental Thermal and Fluid Science, 60, pp. 138-147, 2015.

  4. Gwang Hyeok Seo, Hong Hyun Son, Sung Joong Kim “Numerical analysis of RBHT reflood experiments using MARS 1D and 3D modules”, Journal of Nuclear Science and Technology, 52, 1, 70-84, 2015.

2014

  1. Sung Joong Kim, David Carpenter, Gordon Kohse, Lin-wen Hu “Hydride fuel irradiation in MITR-II: Thermal design and validation results”, Nuclear Engineering and Design, 277,1, PP. 1-14, 2014.

  2. Seongnyeon Lee, Kwang Soon Ha, Hwan-Yeol Kim., Sung Joong Kim “Validation of RCS depressurization strategy and core coolability map for independent scenarios of SBLOCA, SBO, and TLOFW”, Journal of Nuclear Science and Technology, 51, 2, pp.181, 2014.

2013

  1. Yun Ho Kim, Jengsoo Kang, Doh-Yun Jang, Jae Bum Son, Yong-Kyun Kim, Sung Joong Kim. “Analysis of the ambient dose variation due to cosmic rays in Daejeon by using a neutron monitor”, Journal of the Korean Physical Society, 63, 11, pp.2262, 2013.

  2. Sung Joong Kim, Hyungdae Kim “Boiling heat transfer of nanofluids – Special emphasis on critical heat flux”, Recent Patents on Nanotechnology, 7, 3, pp.184-197, 2013.

  3. Jeongsoo Kang, Yunho Kim, Jae Bum Son, Doh Yun Jang, Yong-Kyun Kim and Sung Joong Kim, “Comparing Hadronic Models of GEANT4 for the Neutron Monitor Response Function”, Journal of the Korean Physical Society, Vol. 63, No. 6, pp. 1228∼1233, 2013.

  4. Uiju Jeong, Yun Ho Kim, Jong-Man Kim, Tae-Joon Kim, Sung Joong Kim, “Experimental evaluation of permanent magnet probe flowmeter measuring high temperature liquid sodium flow in the ITSL”, Nuclear Engineering and Design, 265, pp.566-575, 2013.

  5. Sung Joong Kim, L. W. Hu, F. Dunn, “Thermal-Hydraulic Analysis for High Enrichment Uranium (HEU) and Low Enrichment Uranium (LEU) Transitional Core Conversion of the MIT Research Reactor”, scheduled for publication in Nuclear Technology, Vol. 182, 3, pp.315-334, 2013.

2010

  1. Sung Joong Kim, T. McKrell, J. Buongiorno, L. W. Hu, “Subcooled Flow Boiling Heat Transfer of Dilute Alumina, Zinc Oxide, and Diamond Nanofluids at Atmospheric Pressure”, Invited for publication in Nuclear Engineering and Design, Vol. 240, pp. 1186-1194, 2010.

2009

  1. Sung Joong Kim, T. McKrell, J. Buongiorno, L. W. Hu, “Experimental Study of Flow Critical Heat Flux in Alumina-Water, Zinc-oxide-Water and Diamond-Water Nanofluids”, Journal of Heat Transfer, Vol. 131, pp. 043204:1-7, 2009.

  2. Sung Joong Kim, T. McKrell, J. Buongiorno, L. W. Hu, “Enhancement of Flow Boiling Critical Heat Flux (CHF) in Alumina/Water Nanofluids”, Advanced Science Letters, Vol. 2, pp. 100-102, 2009.

2008

  1. Sung Joong Kim, T. McKrell, J. Buongiorno, L. W. Hu, “Alumina Nanoparticles Enhance the Flow Boiling Critical Heat Flux of Water at Low Pressure”, Journal of Heat Transfer, Vol. 130, 044501 – 03, 2008.

  2. J. Buongiorno, L. W. Hu, Sung Joong Kim, R. Hannink, B. Truong, E. Forrest, “Nanofluids for Enhanced Economics and Safety of Nuclear Reactors: an Evaluation of the Potential Features, Issues, and Research Gaps”, Nuclear Technology, Vol. 162, pp. 80-91, 2008.

2007

  1. Sung Joong Kim, I. C. Bang, J. Buongiorno, L. W. Hu, “Surface Wettability Change during Pool Boiling of Nanofluids and its Effect on Critical Heat Flux”, International Journal of Heat and Mass Transfer, Vol. 50, 4105-4116, 2007.
  2. Sung Joong Kim, I. C. Bang, J. Buongiorno, L. W. Hu, “Study of Pool Boiling and Critical Heat Flux Enhancement in Nanofluids”, Bulletin of the Polish Academy of Science, Vol. 55, No. 2, 211-216, 2007 (Invited paper).

2006

  1. Sung Joong Kim, I. C. Bang, J. Buongiorno, L. W. Hu, “Effects of Nanoparticles Deposition on Surface Wettability Influencing Boiling Heat Transfer in Nanofluids”, Applied Physics Letter, Vol. 89, 153107, Issue 15, 2006. (Selected for the October 23, 2006 issue of the Virtual Journal of Nanoscale Science & Technology)

  2. Y. H. Kim, Sung Joong Kim, K. Y. Suh, J. L. Rempe, F. B. Cheung, S. B. Kim, “Internal Vessel Cooling Feasibility Attributed by Critical Heat Flux in Inclined Rectangular Gap”, Nuclear Technology, Vol. 154, pp. 13-40, 2006.

2005

  1. Y. H. Kim, Sung Joong Kim, J. J. Kim, S. W. Noh, K. Y. Suh, J. L. Rempe, F. B. Cheung, S. B. Kim, “Visualization of Boiling Phenomena in Inclined Rectangular Gap”, International Journal of Multiphase Flow, Vol. 31, pp. 618-642, 2005.